Hydraulic oscillator
The Challenge of Extended-Reach Drilling
In long lateral and directional wells, drillers face:
-Poor weight-on-bit (WOB) transfer reducing ROP by 30-50%
-High friction factors causing stick-slip and torsional vibrations
-Tool face instability requiring constant correction cycles
-Increased stuck pipe risk in high-angle sections
Our hydraulic oscillator delivers:
✅ 50% friction reduction between BHA and wellbore
✅ 90% improved WOB transfer to the bit
✅ Tool face stability even in complex formations
Operational Advantages
✅ Drilling Efficiency
35% higher ROB through improved WOB transfer
60% reduction in stick-slip vibrations
✅ Directional Control
Tool face stability within ±5° maintained
Fewer orientation cycles required
✅ Risk Reduction
70% lower stuck pipe risk
Prevents wellbore spiraling and micro-doglegs
✅ Equipment Protection
Reduces MWD/LWD tool failures by 45%
Extends motor and BHA life
Technical Specifications
| Parameter | Specification |
| OD Range | 6-3/4″ to 9-7/8″ (slimhole to conventional) |
| Flow Rate Range | 300-850 GPM |
| Operating Pressure | 300-500 psi differential |
| Frequency Range | 15-25 Hz (adjustable via flow rate) |
| Amplitude | ±0.5-1.5 inches |
| Connections | API REG, IF, FH (all standard sizes) |
| Temperature Rating | -20°C to 175°C |
Field Applications
Extended Reach Drilling: Enables longer laterals with improved weight transfer
Directional Wells: Maintains tool face control in complex formations
Unconventional Shale: Reduces friction in curve and lateral sections
Slimhole Operations: Prevents sticking in restricted diameters
Hard Formations: Reduces stick-slip and improves cutter engagement
